T ThinkEdge Learn

NCERT Class 6 Science projects for students

The practicals that go with the Class 6 chapters — conductors and insulators, electricity and circuits, and the plants and cells around them.

4 projects Beginner first Breadboard circuits

Class 6 is where the syllabus stops being about the world and starts being about electricity, and where a practical does more than any diagram: a student who has held a 9 V battery and felt a 220 Ω resistor get warm has understood current in a way that a diagram cannot give them.

Every project on this page names the chapter it belongs to, lists the materials in the order they are needed, and gives the method as steps a class can follow with a teacher present. The Class 6 practicals here need no soldering and no electronics at all, which is exactly why they work with the youngest classes in a school.

What you need

The parts below are the ones the most of these projects share. Each project page lists the full set for that build.

PartUsed byWhy
Breadboard4Holds the circuit together without solder
1× 9V battery4The supply the circuit runs on
4× jumper wires3The wires that join it up
1× 220Ω resistor3Limits the current through an LED or a pin
1× red LED2The output you can see working
1× slide switch2Makes and breaks the circuit

All 4 ncert class 6 science projects

Easiest first. Each card links to the project's own page with the wiring, the parts and the code written out.

LED Light Up

Your first circuit — light it up

Tier 1 · Basics · Beginner · 20 min
Button-Controlled LED

Press to light, release to turn off

Tier 1 · Basics · Beginner · 20 min
Conductor or Insulator?

NCERT Class 6 Ch 9 — test everyday objects

Tier 1 · Basics · Beginner · 15 min
Buzzer On/Off

Flip the switch — the buzzer buzzes. Flip it back — silence.

Tier 1 · Basics · Beginner · 15 min

How to use these with a class

These 4 projects run from about 15 minutes to 20 minutes each, and 4 of them are Tier 1 — one component and one idea, which is what a class can finish in a single period.

4 of the 4 projects on this page carry the NCERT Science chapter they map to, so the practical and the syllabus can be taught together rather than side by side.

Every one of them can be practised in the browser simulator first, with the real sketch and a real circuit solver behind it, and the first 15 projects are free with no account.

Common questions

Which chapters do these cover?

Electricity and Circuits, Magnets, and the biology chapters on plants, seeds and the human body. The project page names the chapter for each one, so it can be dropped into the right week of the term plan.

Do these need any electronics?

Most do not. The conductor tester and the series-and-parallel bulbs use a battery, a LED and a resistor on a breadboard, which is as close to plug-and-play as a Class 6 practical gets.

How long does each one take?

One period each, with the germination and the osmosis ones needing a week of waiting between the start and the result — start them at the start of the unit and read them at the end of it.

Related

All the projectsThe complete catalogue The guidesHow the ideas behind these work Arduino projects for beginnersThe board-specific builds Arduino simulator in the browserTry any of these without hardware

Try the full simulator with your class

103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.