Buzzer On/Off
Flip the switch — the buzzer buzzes. Flip it back — silence.
Buzzer
Switch
On/Off
What you will learn
- A buzzer buzzes when current flows through it — just like an LED lights up
- A slide switch in series acts as an on/off control for the whole circuit
- A 100Ω resistor in series limits current and protects the buzzer
- Reversing the battery wires makes the buzzer stop (most buzzers do not care about polarity, but it is a good habit)
What you will need
| Component |
|---|
| 1× 9V battery |
| 1× slide switch |
| 1× 100Ω resistor |
| 1× buzzer (piezo) |
| Breadboard |
| 4× jumper wires |
Step by step
Curriculum
This project maps to NCERT Class 6 Science — Ch 9 · Electricity and Circuits. Teachers following the NCERT syllabus can use it as the practical for that chapter.
Take it further
- Try a 220Ω resistor instead of 100Ω — the buzzer will be a bit quieter. Can you hear the difference?
- Add a second buzzer in PARALLEL — both buzz at the same time, and the sound is louder.
- Swap the slide switch for a pushbutton — press to buzz, release to stop.
- Wire TWO buzzers in series with TWO switches — both switches must be ON for any sound to come out.
Practise it before you build it
Wire this circuit in the ThinkEdge Learn simulator first. The simulator runs a real Arduino sketch against a modified-nodal-analysis solver, so the LED on screen actually lights when the current is right — no hardware, no burnt components, and a class can try it in a browser.
Related projects
Arduino — Button + Buzzer DoorbellPress the button, hear a tone. The classic Arduino starter.
LED Light UpYour first circuit — light it up
Button-Controlled LEDPress to light, release to turn off
RGB Color Mixer — Three Switches, Seven ColorsMix any color with three separate LED channels
Arduino — Blink Without DelayUse millis() instead of delay() — the right way to blink
Arduino — Fade an LED with PWManalogWrite on D9 — the smoothest way to dim an LED
Where this project sits
It is also part of these lists, which is how a class usually finds it.
Try the full simulator with your class
103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.