T ThinkEdge Learn

Engineering projects for school students

A telegraph, a counter, a voting machine, an elevator and a bionic hand — engineering problems solved with parts a class can gather.

12 projects Beginner first Arduino uno

The engineering projects are the ones where the answer is not obvious from the chapter title. A voting machine is an input problem. An elevator controller is a limit-switch problem. A bionic hand is a tendon problem. In each case the class is given a constraint — three candidates, a car with two floors, five fingers — and has to build something that satisfies it.

Most of them run on an Arduino, which means they can be practised in the browser simulator before anything is soldered, and the parts are ordinary: pushbuttons, a servo, a relay, a transistor. The pages give the wiring and the code, so the group spends its time on the mechanism rather than on the electronics.

What you need

The parts below are the ones the most of these projects share. Each project page lists the full set for that build.

PartUsed byWhy
Breadboard12Holds the circuit together without solder
1× 220Ω resistor7Limits the current through an LED or a pin
1× Arduino5The board that runs the sketch
1× 9V battery3The supply the circuit runs on
6× jumper wires2The wires that join it up
4× jumper wires2The wires that join it up

All 12 engineering projects

Easiest first. Each card links to the project's own page with the wiring, the parts and the code written out.

Relay Driver

Switching a 50 mA lamp from a 20 mA pin

Tier 1 · Basics · Beginner · 25 min
Morse Code Telegraph

How the first internet worked — one click at a time

Tier 2 · Logic & Sensors · Easy · 25 min
Binary Counter — How Computers Count

Four LEDs, sixteen numbers — counting in twos

Tier 2 · Logic & Sensors · Easy · 25 min
Bicycle-Powered Light

Generate electricity from motion — no batteries needed

Tier 2 · Logic & Sensors · Easy · 30 min
Smart Recycling Bin

Ultrasonic sensor detects when the bin is full

Tier 2 · Logic & Sensors · Easy · 30 min
Classroom Voting Machine

Three buttons, three options, instant democracy

Tier 2 · Logic & Sensors · Easy · 30 min
Conveyor Belt Counter

Count objects on a moving line — like a real factory sensor

Tier 2 · Logic & Sensors · Easy · 25 min
Mini Ferris Wheel

A continuous rotation — the engineering of big wheels

Tier 2 · Logic & Sensors · Easy · 30 min
Insulation Test Chamber

Which material keeps heat in best?

Tier 3 · Combined · Intermediate · 40 min
Smart Sundial

A light sensor that tells the time of day

Tier 3 · Combined · Intermediate · 35 min
Toy Elevator Controller

Limit switches and motor control — the basics of elevator design

Tier 3 · Combined · Intermediate · 45 min
Bionic Hand Prototype

A cardboard hand controlled by fishing line — anatomy meets engineering

Tier 4 · Capstone · Advanced · 90 min

How to use these with a class

These 12 projects run from about 25 minutes to 90 minutes each, and 1 of them are Tier 1 — one component and one idea, which is what a class can finish in a single period.

Each project page carries the full build — the concept, the parts, the wiring one step at a time and the sketch — so a class can work through it without the teacher having to explain every wire.

Every one of them can be practised in the browser simulator first, with the real sketch and a real circuit solver behind it, and the first 15 projects are free with no account.

Common questions

Which engineering project is the best for an exhibition?

The Morse code telegraph. It is instantly recognisable, it works with one button and one buzzer, and the explanation — that this is how every message was sent for a century — is a two-minute story that lands with any audience.

Do these need soldering?

No. They are breadboard projects with the wiring written out step by step. The bionic hand and the elevator need a mount — cardboard, string and hot glue are enough.

What do the engineering projects have in common?

Each one has a constraint the class has to respect — a limited number of pins, a limited number of buttons, a limited amount of current — and the design comes out of that constraint rather than out of the parts list.

Related

All the projectsThe complete catalogue The guidesHow the ideas behind these work Arduino projects for beginnersThe board-specific builds Arduino simulator in the browserTry any of these without hardware

Try the full simulator with your class

103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.