Conveyor Belt Counter
Count objects on a moving line — like a real factory sensor
Counter
Conveyor
Manufacturing
Engineering
What you will learn
- How a counter works in a manufacturing context (production line counting)
- The concept of "events" in computing — each press is one event
- How to use the modulo operator (%) to trigger an action every Nth event
- Why counting is one of the most common sensor applications in industry
What you will need
| Component |
|---|
| 1× 9V battery |
| 1× pushbutton (simulates the break-beam sensor) |
| 1× 220Ω resistor |
| 1× LED (flash on each count) |
| 1× buzzer (long beep every 10 items) |
| Breadboard |
| 4× jumper wires |
Step by step
Take it further
- Replace the button with an LDR + light source — now any object passing through the light beam counts.
- Add a 7-segment display or LCD to show the live count.
- Try the TryEngineering "Candy Conveyor" lesson: build a real conveyor from cardboard and motors, with the counter at the end.
- Track items per minute and estimate production rate.
Practise it before you build it
Wire this circuit in the ThinkEdge Learn simulator first. The simulator runs a real Arduino sketch against a modified-nodal-analysis solver, so the LED on screen actually lights when the current is right — no hardware, no burnt components, and a class can try it in a browser.
Related projects
Classroom Voting MachineThree buttons, three options, instant democracy
Mini Ferris WheelA continuous rotation — the engineering of big wheels
LDR — Automatic Night LightThe room gets dark, the LED turns on
DHT11 — Digital ThermometerRead the room temperature on your laptop
Ultrasonic — Distance SensorMeasure how far away an object is
Servo — The Hello World of MotorsSweep back and forth forever
Guides that use this project
20 guides on the site build this project as part of a longer explanation. The guide says why the circuit works; this page says how to wire it.
How to Make a Drone for a School ProjectHow to make a drone for a school project: a classroom-safe, low-cost build with no LiPo or radio gear, and the measurements to present it with.
Robotics and Autonomous Systems: The Four Sub-AreasRobotics and autonomous systems split into perception, planning, control and SLAM. Here is what each needs, and which parts an Arduino can reach.
ESP32 Microcontroller: The One With the Radio OnboardThe ESP32 is a 3.3 V microcontroller with Wi-Fi and Bluetooth built in. What it really is, how it differs from an Arduino Uno, and where it fits in IoT builds.
ESP32 IoT Projects: From a Single Sensor to a Live DashboardFive ESP32 IoT projects that teach sensors, MQTT publishing, deep sleep and reconnection, each staged so the logic runs in a browser simulator first.
Raspberry Pi 5: What Changed Inside and How to Teach With ItThe Raspberry Pi 5 has a faster CPU, a new RP1 I/O chip and a 5 V power supply. What changed, what it costs, and how to use it in a classroom.
LoRa and LoRaWAN: The Physics of Long Range, Low Power RadioLoRa is the radio, LoRaWAN is the network. Real link budgets, airtimes, the Indian 865 to 867 MHz band and the sensors you can send over it.
Mesh Networking: How Nodes Relay Data for Each OtherA mesh network lets nodes relay data for each other. How flooding and hop limits work, what mesh costs in latency, and when a simple star is better.
3D Printing for StudentsHow a 3D printer works, which type to start with, and how to design your own models, with the electronics behind extrusion and stepper control explained.
Electric Bikes ExplainedHow an electric bike works: the hub or mid-drive motor, the battery and its management, the controller, and what the numbers on the spec sheet actually mean.
Home Energy MonitoringHow to monitor energy use in a home or classroom: clamp meters, energy monitoring modules, the difference between watts and watt-hours, and what the data shows.
Metal 3D PrintingMetal 3D printing explained: powder bed fusion against wire arc, what each process is good for, why metal prints need support and heat treatment, and what it costs.
Edge AI: Decisions Made on the DeviceEdge AI runs the decision on the device instead of in the cloud. Here is what that buys you in latency and privacy, and what a 32 KB microcontroller can really do.
AI Swarm: Many Small Robots, Three RulesA swarm is not a clever algorithm, it is three local rules. Learn separation, alignment and cohesion, then build them as if-statements on an Arduino.
Local LLM: Your Own Model, Your Own MachineRun a language model on your own hardware: the RAM maths for a Raspberry Pi, the real token speeds, and how an Arduino can act on what the model says.
RTX 5080: The Card, the Numbers, the CaveatRTX 5080 specs and price: 16 GB of GDDR7, 360 W of board power and a $999 launch price that no longer matches the street. Here is who should buy one.
Open Code and OpenCode: A Coding Agent You Can ReadOpen code is a loop: read, plan, edit, run, read the error, fix. Here is how opencode, an open source coding agent, fits into a school project and what it costs.
3D Printing in Steel3D printing in steel uses metal powder or wire, not plastic filament. The process involved, why it is expensive, and where a school project should use it.
Drone DeliveryHow drone delivery works in practice: the range limits, the landing and drop mechanisms, the regulatory hurdles, and why most deliveries use a van for the last mile.
How a Drone Flight Controller WorksInside a drone flight controller: sensor fusion, the PID loop, the rate profile and the mixer. The algorithms behind every drone, explained from first principles.
Drone Defence and Interceptor DronesHow drone defence works: why interceptors are cheaper than missiles, how the physics of the engagement works, and why airports are hardest to defend.
Where this project sits
It is also part of these lists, which is how a class usually finds it.
Arduino LED projects for beginners36 projects in this list
Arduino push button projects for beginners14 projects in this list
Arduino buzzer and tone projects19 projects in this list
Engineering projects for school students12 projects in this list
Try the full simulator with your class
103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.