T ThinkEdge Learn

Bionic Hand Prototype

A cardboard hand controlled by fishing line — anatomy meets engineering

Servo Bionic Anatomy Capstone
Arduino servo motor project · Tier 4 · Capstone · Advanced · 90 min · Arduino Uno

What you will learn

What you will need

Component
1× Arduino
5× SG90 servo motors (one per finger, for the full hand)
1× fishing line or strong string (acts as tendons)
1× cardboard (for the hand structure)
1× hot glue gun (to attach joints)
5× 220Ω resistors
5× LEDs (optional — for visual feedback per finger)
Breadboard
10× jumper wires
External 4×AA battery pack for servos

Step by step

Take it further

Practise it before you build it

Wire this circuit in the ThinkEdge Learn simulator first. The simulator runs a real Arduino sketch against a modified-nodal-analysis solver, so the LED on screen actually lights when the current is right — no hardware, no burnt components, and a class can try it in a browser.

Open the interactive lab See plans for your class

Related projects

Pet Feeder — Distance-Triggered ServoWhen the pet is near, drop food Smart Fan — Temperature + DistanceOnly blows when it is hot AND someone is within 100 cm LDR — Light-Following Robot (Solar Tracker)It always faces the brightest spot Servo — The Hello World of MotorsSweep back and forth forever Servo — Two Buttons, Two PositionsPress A → go to 0°. Press B → go to 180°. Servo — Knob to AngleTwist to point

Guides that use this project

6 guides on the site build this project as part of a longer explanation. The guide says why the circuit works; this page says how to wire it.

Robot ArmHow to build a robot arm with hobby servos, a 5 V supply and an Arduino: how to pick joints, wire the power, and test each axis in the simulator. Humanoid Robots: Balance First, Walking SecondWhat makes a humanoid robot work: inverted-pendulum balance, joint torque budgets and centre of mass, plus the Arduino projects to get you there. Tesla Robot Optimus: What the Hardware Has to DoTesla Robot Optimus is a prototype, not a product. Here is what its actuators, sensors and balance problem mean, and how to build the same ideas cheaply. 3D Print Files and STLsWhere to find 3D print files, what an STL file actually is, how to check one before you print, and how to design your own from scratch. 3D Printed Toys and ModelsWhich 3D printed toys make good classroom projects: designs with tolerances and moving parts, and the assembly and mechanism skills they teach. Best 3D Printers for StudentsHow to choose a 3D printer for a classroom: FDM versus resin, enclosed or not, what a Snapmaker, P2S or Bambu Lab does for schools, and what to skip.

Where this project sits

It is also part of these lists, which is how a class usually finds it.

Arduino servo motor projects for students12 projects in this list Engineering projects for school students12 projects in this list

Try the full simulator with your class

103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.