T ThinkEdge Learn

Insulation Test Chamber

Which material keeps heat in best?

Temperature DHT11 Insulation Engineering
Arduino DHT11 temperature sensor project · Tier 3 · Combined · Intermediate · 40 min · Arduino Uno

What you will learn

What you will need

Component
1× Arduino
1× DHT11 temperature & humidity sensor
1× 10kΩ pull-up resistor (for DHT11 data line)
1× 220Ω resistor
1× LED (status indicator)
1× buzzer (alerts you when temperature drops below threshold)
1× cardboard box (the test chamber)
Various insulation materials (newspaper, bubble wrap, foil, wool)
Breadboard
6× jumper wires

Step by step

Take it further

Practise it before you build it

Wire this circuit in the ThinkEdge Learn simulator first. The simulator runs a real Arduino sketch against a modified-nodal-analysis solver, so the LED on screen actually lights when the current is right — no hardware, no burnt components, and a class can try it in a browser.

Open the interactive lab See plans for your class

Related projects

DHT11 — Auto Fan ControllerHot day, fan on. Cool day, fan off. DHT11 — Temperature AlarmToo hot, too cold, or just right Smart SundialA light sensor that tells the time of day Toy Elevator ControllerLimit switches and motor control — the basics of elevator design DHT11 — Digital ThermometerRead the room temperature on your laptop Police SirenAlternating red + blue LEDs with a wailing 600–1500 Hz buzzer

Where this project sits

It is also part of these lists, which is how a class usually finds it.

Arduino LED projects for beginners36 projects in this list Arduino DHT11 temperature sensor projects7 projects in this list Arduino buzzer and tone projects19 projects in this list Engineering projects for school students12 projects in this list

Try the full simulator with your class

103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.