Arduino Mega — 4-Servo Robot Arm
Drive 4 servos at once for a pan-tilt-gripper-tilt arm
Arduino
Mega
Servo
Robot arm
PWM
What you will learn
- How the Servo.h library controls servos with one line of code per servo
- Why the Mega's extra PWM pins are useful (the Uno only has 6 PWM pins, the Mega has 15)
- How `map(potValue, 0, 1023, 0, 180)` converts an analog knob position into a servo angle
What you will need
| Component |
|---|
| 1× Arduino Mega 2560 |
| 4× SG90 servo motor |
| 4× potentiometer |
| 1× breadboard |
| 20× jumper wires |
| 1× external 5V supply (recommended for real servos) |
Step by step
Take it further
- Add 3 potentiometers to manually control the 3 main servos (base/shoulder/elbow) — like a real RC controller.
- Record a sequence of moves and play them back: "REC" starts recording, "STOP" stops, "PLAY" replays the sequence.
- Add an ultrasonic sensor to the gripper and have the gripper close automatically when the gripper is within 5 cm of an object.
Practise it before you build it
Wire this circuit in the ThinkEdge Learn simulator first. The simulator runs a real Arduino sketch against a modified-nodal-analysis solver, so the LED on screen actually lights when the current is right — no hardware, no burnt components, and a class can try it in a browser.
Related projects
Arduino — RGB LED Color MixerThree pots, one RGB LED — mix any color of the rainbow
Arduino Mega — Traffic Light ControllerA full intersection with pedestrian crossing — and a buzzer
Arduino Mega — Multi-Sensor Data HubRead 3 sensors at once and stream them to the Serial Monitor
Arduino — Solar Tracker with Two LDRsA servo that follows the light, like a real solar panel
Arduino — Ultrasonic Radar ScannerA servo sweeps the ultrasonic sensor to scan the room
LDR — Light-Following Robot (Solar Tracker)It always faces the brightest spot
Guides that use this project
20 guides on the site build this project as part of a longer explanation. The guide says why the circuit works; this page says how to wire it.
How to Build a DroneHow to build a drone from scratch: the four subsystems every drone needs, the parts that make them work, and the Arduino projects that teach each one before you fly.
How to Build a RobotHow to build a robot from scratch: one motor and a switch, then sensors, then a line-follower that steers itself. Every stage runs in a browser simulator first.
Robot ArmHow to build a robot arm with hobby servos, a 5 V supply and an Arduino: how to pick joints, wire the power, and test each axis in the simulator.
Humanoid Robots: Balance First, Walking SecondWhat makes a humanoid robot work: inverted-pendulum balance, joint torque budgets and centre of mass, plus the Arduino projects to get you there.
Tesla Robot Optimus: What the Hardware Has to DoTesla Robot Optimus is a prototype, not a product. Here is what its actuators, sensors and balance problem mean, and how to build the same ideas cheaply.
Window Cleaning Robots: How They Stick to GlassHow a window cleaning robot grips glass with a vacuum fan, why the squeegee matters as much as the suction, and how to build the winch logic.
3D Print Files and STLsWhere to find 3D print files, what an STL file actually is, how to check one before you print, and how to design your own from scratch.
3D Printed Toys and ModelsWhich 3D printed toys make good classroom projects: designs with tolerances and moving parts, and the assembly and mechanism skills they teach.
Metal 3D PrintingMetal 3D printing explained: powder bed fusion against wire arc, what each process is good for, why metal prints need support and heat treatment, and what it costs.
3D Printing in Steel3D printing in steel uses metal powder or wire, not plastic filament. The process involved, why it is expensive, and where a school project should use it.
Best 3D Printers for StudentsHow to choose a 3D printer for a classroom: FDM versus resin, enclosed or not, what a Snapmaker, P2S or Bambu Lab does for schools, and what to skip.
UAV Drones ExplainedWhat a UAV is, how the main airframe types differ, and how a drone actually stays upright. The engineering behind drones, taught the way a student can build it.
Drone DeliveryHow drone delivery works in practice: the range limits, the landing and drop mechanisms, the regulatory hurdles, and why most deliveries use a van for the last mile.
Air Taxis and eVTOL AircraftAir taxis and eVTOL aircraft explained: the lift configurations, why certification is the real constraint, and what the physics demands of them.
FPV Drones ExplainedHow an FPV drone works: the camera, video link, goggles and flight controller that make it fly from the pilot's own point of view.
FPV Drone SimulatorsFPV drone simulators let you practise the exact physics of flying before spending money on crashes. What they model accurately, what they skip, and how to pick one.
How a Drone Flight Controller WorksInside a drone flight controller: sensor fusion, the PID loop, the rate profile and the mixer. The algorithms behind every drone, explained from first principles.
Drone Defence and Interceptor DronesHow drone defence works: why interceptors are cheaper than missiles, how the physics of the engagement works, and why airports are hardest to defend.
The Shahed Drone ExplainedHow a Shahed one-way attack drone works: the airframe, the piston engine, the satellite navigation and the economics that made it effective.
Sting Interceptor Drones ExplainedHow the Sting interceptor drone works: a small, fast, camera-carrying multirotor flown into a target by an operator. The physics, the engineering and the economics.
Where this project sits
It is also part of these lists, which is how a class usually finds it.
Try the full simulator with your class
103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.