The Shahed Drone Explained
The Shahed-136 is a 3.5 metre delta-wing aircraft with a piston engine at the back and a warhead in the nose, that flies to a set of coordinates and crashes into them. Almost everything about it is a deliberate simplification.
A simple aircraft, deliberately
The Shahed-136 is roughly 3.5 metres long with a 2.5 metre wingspan, a launch weight near 200 kg, and a cruise speed around 185 km/h. It has a tailless delta wing, a rear-mounted pusher propeller driven by a four-cylinder piston engine, and a warhead in the nose.
What it does not have is almost as important as what it does. It has no camera on the baseline variant and no live control link. The operator enters target coordinates before launch, and the aircraft flies a pre-programmed route using satellite navigation with an inertial backup. It cannot be retasked in flight, and it cannot be recovered.
Why the engine and the wing are shaped that way
A rear pusher propeller and a delta wing are an old combination, and the reason is manufacturing. A pusher keeps the nose free for the warhead and keeps the propeller out of the airflow of a forward-facing intake, and a delta wing is a single large structure that needs few separate parts to assemble.
The piston engine is a two-stroke, which is simple, robust and cheap, but the distinctive sound of these aircraft comes from that engine rather than from anything unusual about the aerodynamics. The economics are the point: an airframe built from composite panels and a copied automotive engine can be produced in dispersed facilities by people who are not aerospace engineers.
What changed, and what it means
The piston-driven Shahed-136 defined the weapon between 2022 and 2025, and by the middle of 2026 it was a shrinking share of what was being produced. Variants with a small turbojet cruise at around 520 km/h, and Russian versions added infrared and optical seekers so they can acquire a target in flight rather than only striking preset coordinates.
That progression is the important lesson, not the vehicle itself. A cheap, simple aircraft can be defended against by interceptors that cost a fraction of a missile. The reason it stayed effective for so long was not technical superiority but the arithmetic of production: you can build a great many of them, and a defender has to shoot every one.
Step by step
-
Study the airframe
A delta wing with a pusher propeller and a warhead in the nose. Simple, and every choice traces back to manufacturing.
-
Understand the propulsion
A two-stroke piston engine at roughly 185 km/h cruise, chosen for simplicity and cost rather than performance.
-
Understand the guidance
Satellite navigation to preset coordinates with an inertial backup, and no camera on the baseline variant.
-
Understand the launch
A disposable rocket booster under the airframe pushes it to cruise speed, then is jettisoned, so the whole system fits on a truck.
-
Understand the economics
A unit cost in the tens of thousands of dollars against targets worth far more, which is what makes mass production rational.
-
Study the defences
Interceptors, jamming, hardening and airspace closure, and how each one changes the arithmetic.
What you'll need
| Item | Qty | Why |
|---|---|---|
| Delta-wing airframe model | 1 | The simplest way to see how the wing area and the payload volume relate. |
| Two-stroke engine model or 2-stroke demonstration | 1 | Why the sound is the identifying feature. |
| Radio receiver and GPS module | 1 each | A working demonstration of coordinate-following navigation. |
| Propeller and hub set | 1 | To see how a pusher configuration differs from a tractor configuration. |
| Rocket model motor and launcher | 1 | A safe demonstration of the assisted launch idea. |
| Rocketry launch and recovery equipment | 1 set | Safety equipment for any launch demonstration, and it is not optional. |
Practise it before you build it
Every step above has a matching circuit in the ThinkEdge Learn simulator. The simulator runs a real
Arduino sketch against a modified-nodal-analysis solver, so digitalWrite actually drives the
LED on screen and the readings change when you change the wiring — no hardware, no burnt components.
The Mega has 4 hardware serial ports (Serial, Serial1, Serial2, Serial3). That means you can talk to 4 different devices at the SAME time — like a GPS, a Bluetooth module, an XBee radio, and the USB. Use 3 of those ports to read 3 different sensors in parallel and stream their data to the Serial Monitor as a CSV row every second. This is the foundation of every real Arduino data logger.
Mount an HC-SR04 ultrasonic sensor on top of a servo. Sweep the servo from 0° to 180° and back, and at each step measure the distance. Print the results to the Serial Monitor as "angle,distance" pairs. Open the Serial Plotter in the Arduino IDE to see a live radar-like graph of the room. With Processing on your computer, you can build a full visual radar.
The Ferris wheel (originally built for the 1893 World's Fair by George Washington Gale Ferris Jr.) is a giant rotating wheel with passenger cars attached to the rim. As the wheel turns, each car stays upright thanks to gravity — the axle of the car pivots as it rotates. In this mini version, you'll use a small servo motor to slowly rotate a cardboard wheel. The same principle of "slow continuous rotation driven by a small motor" is used in wind turbines, radar antennas, satellite dishes, and rotating signs.
A real solar panel tracks the sun across the sky to capture 30-40% more energy than a fixed panel. We can build a simple 1-axis version with two LDRs (one on each side of a divider) and a servo. The Arduino reads both LDRs, compares them, and turns the servo toward the brighter side. With more LDRs, you can do 2-axis tracking.
A real robot arm has at least 4 servos: base rotation, shoulder, elbow, and gripper. The Mega can drive all 4 from independent PWM pins (D9, D10, D11, D12) using the Servo.h library. Each servo is told an angle (0-180°) and the library generates the right PWM signal automatically. The four potentiometers (A0–A3) act as the RC controller — twist them and each servo follows in real time, just like a real robot arm teaching pendant.
The DHT11 is a small blue module that measures temperature (0-50°C) and humidity (20-90%). Inside it has a tiny microcontroller, a humidity sensor, and a thermistor. It speaks a custom one-wire protocol that the Adafruit DHT library decodes for you. You just call dht.readTemperature() and you get a number back.
Common questions
How far does a Shahed drone fly?
Published estimates for the Shahed-136 put its range between 1,500 and 2,500 km depending on the payload, and it cruises at about 185 km/h. A heavier warhead cuts the achievable range significantly, because the range and the payload compete for the same fuel and the same airframe.
Can a Shahed drone be stopped?
Yes. The piston-driven version is slow, large and loud, which makes it a good target for radar and for interceptor aircraft, and its satellite navigation can be disrupted. It has been shot down with air defences, with electronic warfare, and with cheap interceptor drones costing a small fraction of a missile.
Is a Shahed a drone or a missile?
Both descriptions appear and the distinction matters in law. It is a remotely piloted aircraft in form, but because it has no live control link and navigates to preset coordinates, most legal and military analysts classify it as a one-way attack drone, which is effectively a loitering munition rather than an aircraft.
Related guides
Try the full simulator with your class
103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. NCERT Science mapping on 47 projects, with Arabic and English copy in the regional builds.