T ThinkEdge Learn

Hand-Crank Generator (Faraday's Law)

NCERT Class 10 Ch 13 — moving a magnet makes electricity

NCERT Faraday Generator EMF
NCERT Class 10 Science Faraday's Law project · Tier 2 · Logic & Sensors · Easy · 30 min

What you will learn

What you will need

Component
1× strong neodymium magnet (cylindrical, ~1cm diameter)
20m of enamelled copper wire (24-26 AWG)
1× LED (or a sensitive analog meter)
A cardboard tube (to wrap the coil around)
Sandpaper (to strip wire ends)

Step by step

Curriculum

This project maps to NCERT Class 10 Science — Ch 13 · Magnetic Effects of Electric Current. Teachers following the NCERT syllabus can use it as the practical for that chapter.

Take it further

Practise it before you build it

Wire this circuit in the ThinkEdge Learn simulator first. The simulator runs a real Arduino sketch against a modified-nodal-analysis solver, so the LED on screen actually lights when the current is right — no hardware, no burnt components, and a class can try it in a browser.

Open the interactive lab See plans for your class

Related projects

Mini Wind TurbineNCERT Class 10 Ch 14 — kinetic energy to electricity Build an ElectromagnetNCERT Class 8 Ch 4 — electricity makes magnetism Ohm's Triangle in ActionNCERT Class 10 Ch 12 — V = I × R Build a Compass From a WireNCERT Class 10 Ch 13 — right-hand rule in your hand Newton's CradleNCERT Class 9 Ch 9 — momentum and the 3rd law Spring Scale (Hooke's Law)NCERT Class 9 Ch 9 — F = k × x

Guides that use this project

One guide on the site build this project as part of a longer explanation. The guide says why the circuit works; this page says how to wire it.

Solar and Renewable Energy ProjectsSolar and renewable energy projects for students: a light tracker, a solar water heater, a wind generator and a home energy monitor, with the physics behind each.

Where this project sits

It is also part of these lists, which is how a class usually finds it.

NCERT Class 10 Science projects for students8 projects in this list

Try the full simulator with your class

103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.