Ohm's Triangle in Action
NCERT Class 10 Ch 12 — V = I × R
NCERT
Ohm's Law
V=IR
What you will learn
- How to apply V = IR to find the missing quantity
- Why doubling R halves I (with the same V)
- The difference between "ideal" calculations and real-world measurements
What you will need
| Component |
|---|
| 1× 9V battery |
| 1× switch |
| 3× different resistors (100Ω, 220Ω, 1kΩ) |
| 1× LED |
| Breadboard |
| Jumper wires |
| (Optional) 1× multimeter to measure current |
Step by step
Curriculum
This project maps to NCERT Class 10 Science — Ch 12 · Electricity. Teachers following the NCERT syllabus can use it as the practical for that chapter.
Take it further
- Use Arduino's analogRead to measure voltage at different points — build a real "voltmeter" project.
- Build a voltage divider: two resistors in series, measure the voltage between them — see how it splits.
- Add a potentiometer in place of the fixed resistor — now you have a continuously variable current.
Practise it before you build it
Wire this circuit in the ThinkEdge Learn simulator first. The simulator runs a real Arduino sketch against a modified-nodal-analysis solver, so the LED on screen actually lights when the current is right — no hardware, no burnt components, and a class can try it in a browser.
Related projects
Build an ElectromagnetNCERT Class 8 Ch 4 — electricity makes magnetism
Build a Compass From a WireNCERT Class 10 Ch 13 — right-hand rule in your hand
Newton's CradleNCERT Class 9 Ch 9 — momentum and the 3rd law
Spring Scale (Hooke's Law)NCERT Class 9 Ch 9 — F = k × x
Pascal's Hydraulic LiftNCERT Class 8 Ch 6 — pressure transmits through fluids
Solar Water HeaterNCERT Class 10 Ch 14 — energy from the sun
Where this project sits
It is also part of these lists, which is how a class usually finds it.
Try the full simulator with your class
103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.