arduino.cc and the Official Arduino Resources
One domain holds the language reference, the board specifications, the library registry and the free course material. Knowing where each part lives saves a lot of searching.
The four places that matter
The Language Reference is the page for any function you do not fully understand. It is short, written for beginners, and it is the same text the IDE links to when you hover over a function.
The board pages carry the pin maps and the electrical limits, which is where you find out that a given pin cannot be used for interrupts, or that a particular board's 5 V pin is really a 3.3 V signal. The Library Registry is where you check whether a library is actively maintained before you trust it with a class.
How to judge a library in two minutes
Look at the last update date and the number of open issues. A library that has not been touched in three years still works, but it will not work with a newer IDE, and it will not have been tested against a board released since.
Then check whether the examples use the same board you have. Many libraries are written for the Uno and break silently on a Nano, because the two differ in which pins are available for the timers the library relies on.
Step by step
-
Bookmark the language reference
It is the fastest answer to 'what does this function actually do', and it is written for your level.
-
Check your board's pin map before wiring
Every board page lists which pins can do what. Two minutes here prevents the classic 'why does PWM not work on pin 6' problem.
-
Work through the official examples
The built-in examples for each library are usually better tested than any tutorial written by a stranger.
-
Search the library registry before installing
Check the update date, the issue count and the board compatibility before a library goes anywhere near a classroom machine.
-
Use the free learning material
The Arduino learning resources and the Getting Started guide are free, and they map cleanly onto the first two months of a course.
-
Keep a local copy of the pin maps
Print the pin map for each board you use. In a lab with no wifi, a printed sheet on the bench beats a laptop on the internet.
What you'll need
| Item | Qty | Why |
|---|---|---|
| Arduino Uno R3 | 1 | The board whose official page you will read most often. |
| Printed pin map for each board | 1 per board type | Works with no wifi, which is the normal condition of a school lab. |
| USB data cable | 1 | The connection for everything on the site, including the board manager. |
| Breadboard and jumper wires | 1 set | The examples on the site need a circuit, not just a board. |
| 5 mm LEDs and 220 ohm resistors | 10 each | The parts almost every official example uses. |
| Potentiometer | 2 | Used by most of the analogue input examples on the site. |
Practise it before you build it
Every step above has a matching circuit in the ThinkEdge Learn simulator. The simulator runs a real
Arduino sketch against a modified-nodal-analysis solver, so digitalWrite actually drives the
LED on screen and the readings change when you change the wiring — no hardware, no burnt components.
What current, voltage, and a complete circuit mean
The difference between a momentary switch (pushbutton) and a maintained switch (slide switch)
Real LEDs don't just blink — they fade smoothly. Arduino pins marked with ~ (D3, D5, D6, D9, D10, D11) support PWM, which means analogWrite(pin, value) can output 256 different brightness levels instead of just HIGH/LOW. The LED appears to "breathe" smoothly. This is the foundation of every dimmer, color mixer, and motor speed controller.
An LDR (Light-Dependent Resistor) is a sensor whose resistance changes with light: bright = low resistance, dark = high resistance. Connected as a voltage divider with a fixed 10kΩ resistor, the Arduino can read the brightness as a number 0-1023. Use this to turn on an LED when the room gets dark — a real automatic night light.
A servo motor holds whatever angle you tell it. Inside the servo is a small DC motor, a gearbox, and a potentiometer that tells the servo's brain where it currently is. The Arduino sends a pulse 50 times per second; the pulse width (1ms to 2ms) tells the servo the target angle (0° to 180°). The Servo.h library handles all of this for you.
A real Arduino project almost always involves a sensor + a way to see the data. The DHT11 reads temperature and humidity, and the Serial Monitor (the window in the Arduino IDE) shows the readings. The Nano is perfect for this because it plugs directly into a breadboard with no extra wiring for power — you can build a complete data logger in 5 minutes.
A real traffic light runs a state machine: GREEN (cars go) → YELLOW (slow down) → RED (cars stop) → PEDESTRIAN WALK (cross the road) → RED → GREEN. The Mega has enough pins to build a full intersection: 3 LEDs for cars in one direction, 3 LEDs for cars in the other, 2 LEDs for the pedestrian signal, and a button to request to cross. Use millis() for non-blocking timing so the button check is responsive.
Common questions
Is everything on arduino.cc free?
Almost. The documentation, the language reference, the board specifications, the library registry, the example sketches and the learning material are all free and open. The store sells boards, kits and enclosures, and a paid Cloud tier adds dashboards and remote access to your boards.
Why does my library not compile even though it worked in a tutorial?
Usually a board mismatch. Many libraries use timers and interrupts that are available on the Uno but not the same way on a Nano or a Mega, and the compile error is often a cryptic one about a function rather than a clear message. Check the library's own notes for which boards it was tested on.
Is there free Arduino training material for a whole class?
Yes. The Getting Started guide, the built-in examples and the free Arduino learning resources are designed to be worked through in order, and they map directly onto the simulator projects in this library.
Related guides
Try the full simulator with your class
103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. NCERT Science mapping on 47 projects, with Arabic and English copy in the regional builds.