Build a Water Filter
NCERT Class 7 Ch 16 — clean water with layers of materials
What you will learn
- How mechanical filtration works (small particles get stuck in small gaps)
- Why each layer has a purpose: gravel catches big stuff, sand catches medium, charcoal adsorbs chemicals and odors
- The limits of home filtration: it can't remove dissolved chemicals or viruses — that needs chemical treatment or UV
What you will need
| Component |
|---|
| 1× 2L plastic bottle (cut in half, use the bottom half) |
| Cotton balls or cheesecloth |
| Activated charcoal (from a pet store or aquarium shop) |
| Clean sand (or playground sand, washed) |
| Fine gravel (pea-sized) |
| Small stones (for drainage) |
| A bowl of "dirty" water: mix soil, leaves, a drop of food coloring in water |
| A second clean bowl to collect filtered water |
Step by step
Curriculum
This project maps to NCERT Class 7 Science — Ch 16 · Water — A Precious Resource. Teachers following the NCERT syllabus can use it as the practical for that chapter.
Take it further
- Test your filtered water with pH strips (from a pharmacy). Compare to the dirty water.
- Add a layer of cotton at the very top to catch floating debris.
- Try with very muddy water. If the filter clogs, change just the top layers.
Running it in a class
This one is a materials project rather than a circuit, so it is run from the bench: gather what the parts list names, work through the steps, and let the class record what it sees. The measurements are the point — the point of the practical is the number the class produces, not the reading on the screen.
Related projects
Where this project sits
It is also part of these lists, which is how a class usually finds it.
Try the full simulator with your class
103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.