T ThinkEdge Learn

Two Bulbs, Two Ways

NCERT Class 7 Ch 3 — series vs parallel brightness

NCERT Series Parallel
NCERT Class 7 Science Series and Parallel Circuits project · Tier 1 · Basics · Beginner · 20 min

What you will learn

What you will need

Component
1× 9V battery
1× DPDT switch (or two slide switches)
2× 220Ω resistors
2× red LEDs
Breadboard
Jumper wires

Step by step

Curriculum

This project maps to NCERT Class 7 Science — Ch 3 · Electricity — Circuits and Their Components. Teachers following the NCERT syllabus can use it as the practical for that chapter.

Take it further

Practise it before you build it

Wire this circuit in the ThinkEdge Learn simulator first. The simulator runs a real Arduino sketch against a modified-nodal-analysis solver, so the LED on screen actually lights when the current is right — no hardware, no burnt components, and a class can try it in a browser.

Open the interactive lab See plans for your class

Related projects

Conductor or Insulator?NCERT Class 6 Ch 9 — test everyday objects Shadow Puppet TheatreNCERT Class 7 Ch 11 — light travels in straight lines Pendulum TimerNCERT Class 7 Ch 8 — measure time with a swinging weight Friction Test TrackNCERT Class 8 Ch 7 — surfaces change friction Balloon RocketNCERT Class 9 Ch 9 — every action has an equal reaction Sink or Float (Archimedes)NCERT Class 9 Ch 10 — buoyant force equals weight of displaced water

Where this project sits

It is also part of these lists, which is how a class usually finds it.

NCERT Class 7 Science projects for students6 projects in this list

Try the full simulator with your class

103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.