The Angles in a Clock Face
Why the hands are at a right angle at exactly 3:00
What you will learn
- A full circle is 360°, so each of the 12 hour marks is 30°
- The minute hand moves 6° per minute, because it travels 360° in 60 minutes
- The hour hand moves 30° per hour, which is only 0.5° per minute
- At exactly 3:00 the hands are 90° apart — but at 3:30 the hour hand has already moved on
- The angle between the hands is found by subtracting the two hand positions from each other
What you will need
| Component |
|---|
| 1× clock (a real one, a drawing, or a clock app on a phone that shows seconds) |
| 1× protractor |
| 1× ruler |
| 1× sheet of paper with a circle drawn on it, divided into 12 |
| A pencil and a coloured pen |
| 1× calculator or phone |
Step by step
Curriculum
This project maps to NCERT Class 6 Science — Ch 5 · Understanding Elementary Shapes / Ch 4 · Basic Geometrical Ideas. Teachers following the NCERT syllabus can use it as the practical for that chapter.
Take it further
- Find all the times in a 12-hour period when the hands overlap, and the exact gaps between them. They are not evenly spaced.
- Find a time when the hands are at a right angle, to the nearest minute, and verify by drawing.
- Measure the angle of the minute hand from the 12 every 5 minutes for an hour and plot the results. It should be a straight line.
- Work out the angle between the hands at 2:20 and check with a protractor.
- Explain why watch designers put the hands at 10:10 in advertisements, using the angle you measured.
Running it in a class
This one is a materials project rather than a circuit, so it is run from the bench: gather what the parts list names, work through the steps, and let the class record what it sees. The measurements are the point — the point of the practical is the number the class produces, not the reading on the screen.
Related projects
Where this project sits
It is also part of these lists, which is how a class usually finds it.
Try the full simulator with your class
103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.