T ThinkEdge Learn

PIR — Smart Doorbell / Welcome Light

A guest walks up to the door — chime + welcome LED

PIR Buzzer LED Welcome
Arduino PIR motion sensor project · Tier 3 · Combined Projects · Intermediate · 30 min · Arduino Uno

What you will learn

What you will need

Component
1× 9V battery
1× PIR motion sensor
1× 220Ω resistor
1× white LED
1× buzzer
1× slide switch (doorbell on/off)

Step by step

Take it further

Practise it before you build it

Wire this circuit in the ThinkEdge Learn simulator first. The simulator runs a real Arduino sketch against a modified-nodal-analysis solver, so the LED on screen actually lights when the current is right — no hardware, no burnt components, and a class can try it in a browser.

Open the interactive lab See plans for your class

Related projects

Police SirenAlternating red + blue LEDs with a wailing 600–1500 Hz buzzer Ultrasonic — Reverse Parking SensorBeep faster as you get closer DHT11 — Temperature AlarmToo hot, too cold, or just right PIR — Intruder AlarmMotion + armed switch = loud alarm. Disarm first. Simon Says — Memory GameRepeat the pattern, level by level Ultrasonic — Pitch by DistanceCloser = higher pitch

Where this project sits

It is also part of these lists, which is how a class usually finds it.

Arduino LED projects for beginners36 projects in this list Arduino PIR motion sensor projects4 projects in this list Arduino buzzer and tone projects19 projects in this list

Try the full simulator with your class

103 guided circuit projects, 21 lessons and an in-browser Arduino simulator. The first 15 projects are free, no account needed. One licence covers a whole school.